ADS131B23-Q1
- AEC-Q100 qualified for automotive applications
- Temperature grade 1: –40°C to +125°C, T A
- Functional Safety-Compliant
- Developed for functional safety applications
- Documentation available to aid ISO 26262 functional safety system design up to ASIL D
- Systematic capability up to ASIL D
- Hardware capability up to ASIL D
- Two simultaneous-sampling, 24-bit ADCs (ADC1A, ADC1B) for current-shunt measurements:
- Programmable full-scale range:
- ±39 mV to ±312.5 mV
- Supports a wide range of shunt resistor values and current-measurement ranges
- Achieve high-accuracy current-shunt measurements with:
- Offset error: ±1.5 µV (max)
- Gain drift: 20 ppm/°C (max)
- Programmable data rate: 500 SPS to 64 kSPS
- Digital overcurrent comparator per ADC with programmable thresholds for fast overcurrent detection
- Programmable full-scale range:
- One multiplexed, 16-bit ADC (ADC2A) for voltage and temperature measurements:
- 8 analog inputs
- Programmable full-scale range: ±312.5 mV to ±1.25 V
- Channel sequencer
- Monitoring and diagnostic features to mitigate and detect random hardware faults
- Supply-voltage range: 2.9 V to 16 V
- SPI-compatible interface
- 9 GPIOs with PWM capability
The ADS131B23-Q1 is a fully integrated, high-voltage battery pack monitor for automotive electrical vehicle (EV) battery management systems (BMS).
The ADS131B23-Q1 integrates two simultaneous-sampling, high-precision, 24-bit ADC channels (ADC1A, ADC1B) to redundantly measure battery current with high resolution and accuracy using an external shunt resistor. Two independent digital comparators enable fast overcurrent detection in parallel with the two ADCs.
An additional multiplexed, 16-bit ADC (ADC2A) is available to measure shunt temperature and other voltages in the system, such as battery-pack voltage, using external high-voltage resistor dividers. Shunt temperature is measured using an external temperature sensor, such as a thermistor or an analog output temperature sensor. ADC2A is equipped with a channel sequencer that automatically steps through the configured multiplexer inputs to reduce communication on the SPI.
The device integrates many monitoring and diagnostic features to mitigate and detect random hardware faults to aid in the development of functionally safe BMS.
Internal linear regulators with input ranges up to 16-V support powering the device with unregulated DC/DC converters.
The ADS131B23-Q1 is offered in a 48-pin HTQFP package and is specified over the automotive temperature range of –40°C to +105°C.
索取更多資訊
提供功能安全資訊,例如失效模式、影響和診斷分析 (FMEDA)、安全分析報告和安全手冊。立即索取
您可能會感興趣的類似產品
引腳對引腳且具備與所比較裝置相同的功能
技術文件
類型 | 標題 | 日期 | ||
---|---|---|---|---|
* | Data sheet | ADS131B23-Q1 Automotive, High-Voltage Battery Pack Monitor With SPI and3 ADC Channels for Voltage, Current, and Temperature Sensing datasheet | PDF | HTML | 2023年 7月 26日 |
Application note | Digital Filter Types in Delta-Sigma ADCs (Rev. A) | PDF | HTML | 2023年 3月 29日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
ADS131B26Q1EVM-PDK — 適用六 ADC 通道高電壓 SPI 電池組監控器的 ADS131B26 性能展示套件
ADS131B26-Q1 評估模組 (EVM) 性能展示套件 (PDK) 是一款結合 ADS131B26Q1EVM 和精確主機介面 (PHI) 控制器板的完整評估與展示平台。PHI 控制器板可讓 ADS131B26Q1EVM 透過 USB 埠連接電腦,並與設計用於評估 ADS131B26-Q1 的軟體介接。
ADC-DESIGN-CALC — Online design calculator tool for TI Precision ADCs
支援產品和硬體
產品
精確 ADC
隔離式 ADC
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)
支援產品和硬體
產品
精密度運算放大器 (Vos<1mV)
一般用途運算放大器
音訊運算放大器
轉阻放大器
高速運算放大器 (GBW ≥ 50 MHz)
功率運算放大器
視訊放大器
線路驅動器
轉導放大器與雷射驅動器
全差分放大器
精確 ADC
生物感測 AFE
高速 ADC (≥10 MSPS)
接收器
觸控式螢幕控制器
差分放大器
儀器放大器
音訊線路接收器
類比電流感測放大器
數位電源監測器
配備整合式分流電阻器的類比電流感測放大器
具整合式分流電阻器的數位電源監測器
晶粒與晶圓服務
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
TINA-TI — 基於 SPICE 的類比模擬程式
封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
---|---|---|
HTQFP (PHP) | 48 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。