首頁 放大器 電流感測放大器 類比電流感測放大器
首頁
放大器
電流感測放大器
類比電流感測放大器

INA302-Q1

現行

具雙比較器的 AEC-Q100、36V、雙向、550kHz、4V/µs、高精度電流感測放大器

立即訂購
產品規格表

INA302-Q1

現行
產品規格表 立即訂購

產品詳細資料

Product type Analog output with integrated comparator Common-mode voltage (max) (V) 36 Common-mode voltage (min) (V) 0 Input offset (±) (max) (µV) 30, 50, 80 Input offset drift (±) (typ) (µV/°C) 0.1 Voltage gain (V/V) 20, 50, 100 CMRR (min) (dB) 100 Bandwidth (kHz) 400, 440, 550 Supply voltage (max) (V) 5.5 Supply voltage (min) (V) 2.7 Iq (max) (mA) 1.1 Number of channels 1 Comparators (#) 2 Gain error (%) 0.075, 0.1, 0.15 Gain error drift (±) (max) (ppm/°C) 10 Slew rate (V/µs) 4 Features Alert Function, Bidirectional, High precision, Low-side Capable Rating Automotive TI functional safety category Functional Safety-Capable Operating temperature range (°C) -40 to 125
Product type Analog output with integrated comparator Common-mode voltage (max) (V) 36 Common-mode voltage (min) (V) 0 Input offset (±) (max) (µV) 30, 50, 80 Input offset drift (±) (typ) (µV/°C) 0.1 Voltage gain (V/V) 20, 50, 100 CMRR (min) (dB) 100 Bandwidth (kHz) 400, 440, 550 Supply voltage (max) (V) 5.5 Supply voltage (min) (V) 2.7 Iq (max) (mA) 1.1 Number of channels 1 Comparators (#) 2 Gain error (%) 0.075, 0.1, 0.15 Gain error drift (±) (max) (ppm/°C) 10 Slew rate (V/µs) 4 Features Alert Function, Bidirectional, High precision, Low-side Capable Rating Automotive TI functional safety category Functional Safety-Capable Operating temperature range (°C) -40 to 125
TSSOP (PW) 14 32 mm² 5 x 6.4
  • AEC-Q100 qualified for automotive applications
    • Temperature grade 1: –40°C ≤ TA ≤ +125°C
    • HBM ESD classification level 2
    • CDM ESD classification level C6
  • Functional Safety-Capable
  • Wide common-mode input range: –0.1 V to +36 V
  • Dual comparator outputs:
    • INA302-Q1: Two independent overlimit alerts
    • INA303-Q1: Window comparator
    • Threshold levels set individually
    • Comparator 1 alert response: 1 µs
    • Comparator 2 adjustable delay: 2 µs to 10 s
    • Open-drain outputs with independent latch control modes
  • High accuracy amplifier:
    • Offset voltage: 30 µV (max, A3 version)
    • Offset voltage drift: 0.5 µV/°C (max)
    • Gain error: 0.15% (max, A3 version)
    • Gain error drift: 10 ppm/°C
  • Available amplifier gains:
    • INA302A1-Q1, INA303A1-Q1: 20 V/V
    • INA302A2-Q1, INA303A2-Q1: 50 V/V
    • INA302A3-Q1, INA303A3-Q1: 100 V/V
  • AEC-Q100 qualified for automotive applications
    • Temperature grade 1: –40°C ≤ TA ≤ +125°C
    • HBM ESD classification level 2
    • CDM ESD classification level C6
  • Functional Safety-Capable
  • Wide common-mode input range: –0.1 V to +36 V
  • Dual comparator outputs:
    • INA302-Q1: Two independent overlimit alerts
    • INA303-Q1: Window comparator
    • Threshold levels set individually
    • Comparator 1 alert response: 1 µs
    • Comparator 2 adjustable delay: 2 µs to 10 s
    • Open-drain outputs with independent latch control modes
  • High accuracy amplifier:
    • Offset voltage: 30 µV (max, A3 version)
    • Offset voltage drift: 0.5 µV/°C (max)
    • Gain error: 0.15% (max, A3 version)
    • Gain error drift: 10 ppm/°C
  • Available amplifier gains:
    • INA302A1-Q1, INA303A1-Q1: 20 V/V
    • INA302A2-Q1, INA303A2-Q1: 50 V/V
    • INA302A3-Q1, INA303A3-Q1: 100 V/V

The INA302-Q1 and INA303-Q1 (INA30x-Q1) devices feature a high common-mode, bidirectional, current-sensing amplifier and two high-speed comparators to detect out-of-range current conditions. The INA302-Q1 comparators are configured to detect and respond to overcurrent conditions. The INA303-Q1 comparators are configured to respond to both overcurrent and undercurrent conditions in a windowed configuration. These devices feature an adjustable limit threshold range for each comparator set using an external limit-setting resistor. These current-shunt monitors can measure differential voltage signals on common-mode voltages that can vary from –0.1 V up to +36 V, independent of the supply. In addition, these devices will survive with common-mode voltages as high as 40 V.

The open-drain alert outputs can be configured to operate in either a transparent mode (output status follows the input state), or in a latched mode (alert output is cleared when the latch is reset). The alert response time for comparator 1 is under 1 µs, and the alert response for comparator 2 is set through an external capacitor ranging from 2 µs to 10 s.

These devices operate from a single 2.7-V to 5.5-V supply, drawing a maximum supply current of 950 µA. The devices are specified over the extended operating temperature range of –40°C to +125°C, and are available in a 14-pin TSSOP package.

The INA302-Q1 and INA303-Q1 (INA30x-Q1) devices feature a high common-mode, bidirectional, current-sensing amplifier and two high-speed comparators to detect out-of-range current conditions. The INA302-Q1 comparators are configured to detect and respond to overcurrent conditions. The INA303-Q1 comparators are configured to respond to both overcurrent and undercurrent conditions in a windowed configuration. These devices feature an adjustable limit threshold range for each comparator set using an external limit-setting resistor. These current-shunt monitors can measure differential voltage signals on common-mode voltages that can vary from –0.1 V up to +36 V, independent of the supply. In addition, these devices will survive with common-mode voltages as high as 40 V.

The open-drain alert outputs can be configured to operate in either a transparent mode (output status follows the input state), or in a latched mode (alert output is cleared when the latch is reset). The alert response time for comparator 1 is under 1 µs, and the alert response for comparator 2 is set through an external capacitor ranging from 2 µs to 10 s.

These devices operate from a single 2.7-V to 5.5-V supply, drawing a maximum supply current of 950 µA. The devices are specified over the extended operating temperature range of –40°C to +125°C, and are available in a 14-pin TSSOP package.
filter 尋找其它 類比電流感測放大器
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相似於所比較的產品
INA301-Q1 現行 具比較器的 AEC-Q100、36V、550kHz、4V/µs、高精度電流感測放大器 The INA301-Q1 has a single ALERT with similar performance
INA303-Q1 現行 具有窗口比較器的 AEC-Q100、36V、雙向、550 kHz、4V/µs、高精度電流感測放大器 The INA303-Q1 has window comparotor functionality

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 14
類型 標題 日期
* Data sheet INA30x-Q1 AEC-Q100, 36-V, Bidirectional, 550-kHz, 4V/µs, High-Precision Current Sense Amplifier With Dual Window Comparator datasheet (Rev. A) PDF | HTML 2021年 5月 25日
Application brief Integrating the Current Sensing Resistor (Rev. D) PDF | HTML 2023年 4月 7日
Application brief Measuring Current To Detect Out-of-Range Conditions (Rev. D) PDF | HTML 2022年 3月 10日
Application note Using a PCB Copper Trace as a Current-Sense Shunt Resistor PDF | HTML 2022年 1月 25日
Application brief Measuring Current for Handle Multiple Out-of-Range Conditions (Rev. C) PDF | HTML 2021年 10月 4日
Application brief Integrating the Current Sensing Signal Path (Rev. B) PDF | HTML 2021年 9月 29日
Functional safety information INA30x-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA PDF | HTML 2021年 4月 15日
Application brief High-Side Motor Current Monitoring for Over-Current Protection (Rev. B) PDF | HTML 2021年 2月 23日
Technical article How to design an automotive transient and overcurrent protection filter PDF | HTML 2020年 10月 14日
Application brief Bidirectional, Low-Side Phase Current Sensing With Onboard Overcurrent Detection (Rev. D) 2019年 3月 6日
Application brief External current sense amps vs integrated onboard amplifiers for current sensing (Rev. B) 2019年 2月 19日
Circuit design Overcurrent event detection circuit 2018年 7月 31日
Application brief Low-Drift, Low-Side Current Measurements for Three-Phase Systems (Rev. B) 2017年 9月 5日
White paper Overcurrent protection enables more efficient and reliable systems 2016年 5月 16日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

INA302EVM — INA302 高速精密電流感測放大器評估模組

The INA302EVM evaluation module (EVM) is a compact, easy-to-use platform for evaluating the main features and performance of the INA302 High-Speed Precision Current-Sense Amplifier with Dual Integrated Comparators, across its specified input voltage, common-mode voltage and temperature ranges. The (...)
使用指南: PDF
TI.com 無法提供
模擬型號

INA302 PSpice Model

SBOMB41.ZIP (64 KB) - PSpice Model
下載
模擬型號

INA302 TINA-TI Reference Design

SBOMAC2.TSC (324 KB) - TINA-TI Reference Design
下載
模擬型號

INA302 TINA-TI Spice Model

SBOMAC1.ZIP (30 KB) - TINA-TI Spice Model
下載
模擬型號

INA302A1 PSpice Model

SBOMBH3.ZIP (35 KB) - PSpice Model
下載
模擬型號

INA302A2 PSpice Model

SBOMBH4.ZIP (35 KB) - PSpice Model
下載
模擬型號

INA302A3 PSpice Model

SBOMBH5.ZIP (35 KB) - PSpice Model
下載
計算工具

CS-AMPLIFIER-ERROR-TOOL — 電流感測放大器比較與錯誤工具

此 Excel 計算機提供兩個與五個標準電流感測放大器的比較，並提供包含各裝置基本參數的圖表。此計算機也會採用使用者的系統條件輸入，例如共模電壓、供應電壓、分流電阻器值與公差，然後在可調整電流範圍中繪製錯誤曲線。此外，計算機會根據計算的全刻度輸入電壓除以最大量測電流，輸出最大分流值 (mΩ)。
View Options
設計工具

CIRCUIT060035 — 具有窗型比較器電路的雙向電流感測

此雙向電流感測解決方案採用電流感測放大器與高速雙比較器，並具備軌對軌輸入共模範圍，可在比較器輸出 (OUTA 和 OUTB) 處建立過電流 (OC) 警示訊號，如果輸入電流 (IG1) 高於 100 A 或降至 -35 A 以下。在此實作中，兩個過電流警示訊號都是高電位作動，因此當超過 100 A 或 -35 A 閾值時，比較器輸出將會變高。在兩個比較器上實作外部磁滯，因此當電流降低 10% (90 A 和 -31 A) 時，比較器輸出將回到邏輯低狀態。雖然下方電路將分流電阻器 R8 連接至接地，但相同的電路仍適用於高壓側電流感測，最高可達 INA 的共模電壓範圍。
View Options
設計工具

CIRCUIT060037 — 精密過電流閂鎖電路

這個高壓側電流感測解決方案採用電流感測放大器、含整合式參考的比較器以及 P 通道 MOSFET，以建立過電流閂鎖電路。當偵測到負載電流大於 200 mA 時，電路會中斷系統與電源的連接。比較器輸出將閂鎖 (將 P 通道 MOSFET 的閘極電壓保持在 0 V)，直到電路的電源開始循環，因為比較器會驅動 P 通道 MOSFET 的閘極，並將訊號傳送回電流感測放大器的參考針腳。
View Options
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
要求
模擬工具

TINA-TI — 基於 SPICE 的類比模擬程式

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
View Options
參考設計

TIDA-00302 — 具瞬態穩定性的電流分流監控器參考設計

This high-side current shunt monitor is used to measure the voltage developed across a current-sensing resistor when current passes through it.

Additionally, an external protection circuit is implemented to provide surge and fast-transient protection and demonstrate the different immunity levels to (...)

Design guide: PDF
電路圖: PDF
參考設計

TIDA-020033 — 車用 H 類音訊與追蹤電源供應器參考設計

This reference design demonstrates a Class-H audio and tracking power supply audio subsystem. The TAS6584-Q1 audio amplifier tracks the envelope of the digital audio input and adjusts the LM5123-Q1 boost output voltage to meet the power efficiency requirements without the need for an external (...)
Design guide: PDF
參考設計

TIDA-020040 — 汽車瞬態和過電流保護濾波器參考設計

This reference design showcases a protection system for voltage and current transient events typically found in automotive systems. This reference design optimizes functionality, size and protection capabilities while not sacrificing power delivery for premium audio amplifiers.
Design guide: PDF
電路圖: PDF
封裝 針腳 CAD 符號、佔位空間與 3D 模型
TSSOP (PW) 14 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片